Page Comparison

...

1. Click 'Create a new account'
2. Complete all fields as required by the organisation
   1. The details required may vary slightly between each system configuration
   2. Fields marked with * are mandatory.
      
      
3. Click 'Create Account'
4. If Induction selection is required, refer to the next section. If this isn't required, the eLearn courses required to be completed will be displayed

...

The My Training tab is where current and completed courses are displayed and accessed. 

Current Courses

Any eLearn courses required to be completed will be displayed on the 'My Training' tab in the 'Current Courses' page.

Info
title Course Structure
A Course Group is the top level of the eLearn hierarchy. A Course Group can consist of many Courses. A Course can consist of many Modules. Modules can consist of several Content Items Resources but only ever 1 Assessment (or none) Category Belongs to Example Image (click to enlarge) Course Group N/A - Overarching top level Star Wars Galaxy Image Modified Course Stand alone OR belongs to a Course Group course group SWG Induction SWG Flight Safety 101 Death Star Training There can be 1 or multiple courses in each Course Group course group A course does not have to belong to a course group and can be a stand alone item Image Modified Module Always belongs to a Course course SWG Standards of Business Conduct SWG Safety Behaviours There can be 1 or multiple Modules modules in each Course course Image Modified Resources (Content) Always belongs to a Module module SWG Standards of Business Conduct Part 1 SWG Standards of Business Conduct Part 2 SWG Standards of Business Conduct Part 3 There can be 1 or multiple content items resources for each module Image Modified Assessment Always belongs to a Module module Assessment There is only ever 1 assessment per Module module. A Module module does not have to have an Assessment assessment Image Modified

Any eLearn courses required to be completed will be displayed on the 'My Training' tab in the 'Current Courses' page. Partially completed courses will also be listed. 

Some courses may have pre-requisite requirements. In the image below for example, The SWG Induction course for the Star Wars Galaxy course group must be completed before the SWG - Flight Safety 101 course will become available. SWG - Management, however, can be completed at anytime.

Complete eLearn Training

To complete eLearn training, from the Current Courses page:

1. Click 'Start' on the required course
   
   
2. Some courses will contain more than one module, as shown below. In these cases, pre-requisites may again be applied
   1. Click 'Start' on the required module
      
      
      
      
3. Some modules may contain an Assessmentassessment. Assessments can't be completed until the modules has been viewed. Click 'View'
   
   
   
   
4. Every module and presentation will play slightly differently, dependant on configuration. Follow the specific module instructions to complete 
5. If no assessment is required, click 'Continue' and proceed to step 11
   
   
   
   
6. Once the module has been viewed successfully, the Assessment assessment will become available. Click 'Start'
   
   
   
   
7. Assessments can be configured differently. A passmark of 100% may be required for some assessments for example, whilst others may only require a passmark of 80%. All questions will be multiple choice, with only 1 correct answer.
   1. Answer all questions by selecting a single response
8. Click 'Submit'
   
   
   
   
9. If the assessment is not successfully passed, the module must be re-attempted. Click 'Click to attempt' to complete again
   
   
   
   
10. Repeat this process until the assessment is successfully passed
11. Read the declaration and tick the box

12. Click 'Submit Declaration'
    
    
    
    

    Warning
    title Declaration
    Completion of modules will not be registered until the declaration box has been ticked and submitted, even if all modules have been viewed and assessments passed.

    
    

13. If the course consisted of more than 1 module, several options will be displayed:
    1. Return to the course list - return to the home My Courses page
    2. Continue - proceed to the next module in the course
       
       
       
       
14. Once the entire course is completed, several options will be displayed:
    1. Return to the course list - return to the home My Courses page
    2. Print Receipt - print a full page receipt of completion
    3. Print Induction Card - print a small receipt of completion
    4. Continue - proceed to the next course
       
       
       
       
15. Continue until all required courses are completed

...

• View course results, including completion and relevant expiry dates
• View course content
• Run an Excel list report
• Print course receipts

View Course Results and Details

To view completed course results and details, from the Completed Courses page:

1. Use filters to locate the required course
2. Click 'Action's' to the far right-hand side
   
   Image Added
   
   
3. Click 'View Results'
   
   Image Added
   
   
4. Results will be displayed
   
   Image Added
   
   
5. Click 'Back to Completed Course' or 'Back' to return to the Completed Courses page

Printing Course Receipts 

...

Review Course Content

To review content in courses that have already been completed, from the Completed Courses page:

1. Use filters to locate the required course
2. Click 'Show Course' to the far right-hand side
   
   Image Added
   
   
3. Click 'Review' on the module to be reviewed
   
   Image Added
   
   
4. Replay the content and/ or assessment as desired

Printing Course Receipts and Generating Reports from the My Training Page

Induction completion receipts are often required to be presented prior to commencing work for an organisation. 

Print Receipts

To print a specific receipt (PDF) for an individual course, from the Completed Courses page:

1. Use filters to locate the required course
2. Click 'Action's' to the far right-hand side
   
   Image Added
   
   
3. Two print options are available
   
   Image Added
   
   Both will open as a PDF and can be saved as required
   1. Print - displays a full page receipt listing all completed courses and a QRG code
      
      Image Added
      
      
   2. Print Induction Card - prints an induction card showing user details, course group completed and a signature space
      
      Image Added
      
      

Excel List Report

To generate a report for a specific group of completed courses, from the Completed Courses page:

1. Select the relevant filters
2. Click 'Filter'
3. All results will be displayed at the bottom of the screen

4. Click 'Excel Export' to generate this report into Excel
   
   Image Added

The My Details tab is where users can update their details and change their course group selections if required.

My Details

The My Details page lists all the details entered during the self-registration process. Details can be edited as required, ensuring 'Save' is clicked to save any changes made. 

Note, for security reasons, the password will never be displayed, but it can be changed in this screen.

Image Added

My Course Groups

If the incorrect course group is selected during the self-registration process, it can be edited in the My Course Groups page.

To change the course group selection, from the My Course Groups page:

1. Untick the incorrect selections
2. Tick the correct sections
3. Click 'Update'
   
   Image Added
   
   
4. Changes will be reflected on the users My Training page