Induction Self-Registration & End-User Guide

The self-registration page will have a unique link which can be provided by system administrators.

Returning User:

To log in as a returning user (either end-user or administrator), from the Self-Registration Page:

1. Enter Username and Password
2. Click 'Log in'

Password Reset

To request a new password:

1. Click 'Forgotten password?' 
2. Enter the registered user name or email address
   
   
   
   
3. An email will be sent to the registered email address
4. Follow the link within the email to reset the password 

New User

To create a new account, from the Self-Registration Page:

1. Click 'Create a new account'
2. Complete all fields as required by the organisation
   1. The details required may vary slightly between each system configuration
   2. Fields marked with * are mandatory.
      
      
3. Click 'Create Account'
4. If Induction selection is required, refer to the next section. If this isn't required, the eLearn courses required to be completed will be displayed

Course Selection

If course selection is a requirement:

1. An instructional page may display. An example is shown below:
   
   
   
   
2. The course pathway options will then display
   1. In the image below for example, the first level of choice is the location
   2. When Star Wars Galaxy is selected, additional options are displayed
   3. Click 'Update'
      
      
3. The eLearn courses required to be completed will be displayed

The My Training tab is where current and completed courses are displayed and accessed. 

Current Courses

Any eLearn courses required to be completed will be displayed on the 'My Training' tab in the 'Current Courses' page.

Course Structure

A Course Group is the top level of the eLearn hierarchy. A Course Group can consist of many Courses. A Course can consist of many Modules. Modules can consist of several Content Items but only ever 1 Assessment (or none)

Category	Belongs to	Example	Image (click to enlarge)
Course Group	N/A - Overarching top level	Star Wars Galaxy
Course	Stand alone OR belongs to a Course Group	SWG Induction SWG Flight Safety 101 Death Star Training There can be 1 or multiple courses in each Course Group
Module	Always belongs to a Course	SWG Standards of Business Conduct SWG Safety Behaviours There can be 1 or multiple Modules in each Course
Content	Always belongs to a Module	SWG Standards of Business Conduct Part 1 SWG Standards of Business Conduct Part 2 SWG Standards of Business Conduct Part 3 There can be 1 or multiple content items for each module
Assessment	Always belongs to a Module	Assessment There is only ever 1 assessment per Module. A Module does not have to have an Assessment

Some courses may have pre-requisite requirements. In the image below for example, The SWG Induction course for the Star Wars Galaxy course group must be completed before the SWG - Flight Safety 101 course will become available. SWG - Management, however, can be completed at anytime.

To complete eLearn training, from the Current Courses page:

1. Click 'Start' on the required course
   
   
2. Some courses will contain more than one module, as shown below. In these cases, pre-requisites may again be applied
   1. Click 'Start' on the required module
      
      
      
      
3. Some modules may contain an Assessment. Assessments can't be completed until the modules has been viewed. Click 'View'
   
   
   
   
4. Every module and presentation will play slightly differently, dependant on configuration. Follow the specific module instructions to complete 
5. If no assessment is required, click 'Continue' and proceed to step 11
   
   
   
   
6. Once the module has been viewed successfully, the Assessment will become available. Click 'Start'
   
   
   
   
7. Assessments can be configured differently. A passmark of 100% may be required for some assessments for example, whilst others may only require a passmark of 80%. All questions will be multiple choice, with only 1 correct answer.
   1. Answer all questions by selecting a single response
8. Click 'Submit'
   
   
   
   
9. If the assessment is not successfully passed, the module must be re-attempted. Click 'Click to attempt' to complete again
   
   
   
   
10. Repeat this process until the assessment is successfully passed
11. Read the declaration and tick the box

12. Click 'Submit Declaration'
    
    
    
    

    Declaration

    Completion of modules will not be registered until the declaration box has been ticked and submitted, even if all modules have been viewed and assessments passed.

13. If the course consisted of more than 1 module, several options will be displayed:
    1. Return to the course list - return to the home My Courses page
    2. Continue - proceed to the next module in the course
       
       
       
       
14. Once the entire course is completed, several options will be displayed:
    1. Return to the course list - return to the home My Courses page
    2. Print Receipt - print a full page receipt of completion
    3. Print Induction Card - print a small receipt of completion
    4. Continue - proceed to the next course
       
       
       
       
15. Continue until all required courses are completed

Completed Courses

Once complete, courses will be viewable via the Completed Courses page. 

From the Completed Courses page, users can:

• View course results, including completion and relevant expiry dates
• View course content
• Run an Excel list report
• Print course receipts

Printing Course Receipts